A.R.S. Mod Law Sling Instructions

Video tutorial is located at the bottom of the page.

Step 1:

After adjusting your sling for fit, ensure the front section has enough material to be tensioned securely onto the stock or brace.

Step 2:

Hook the front section of the sling to the stock/brace and pull the adjustment slider (pull tab) forward toward the muzzle to apply tension

Tip: Make sure the release buckle is on the same side as the slider and not trapped between the sling and the stock/brace.

 

Step 3:

Take the rear section of the sling and tuck the slack through the elastic retention band near the slider.

If you’re not using a Law Tactical Folding Adapter, skip to Step 6.

 

Step 4:

If using a Law Tactical Folder, begin folding your stock/brace while keeping pressure on the sling near the hinge.

Pause halfway to ensure the sling isn’t caught in the hinge, then continue folding. The webbing should stay in a straight line, with the buckle retained by the stock. Folding is now complete.

Step 5:

Deploy the folder. The Arid Retention System will remain secure and intact.

 

 

Step 6:
To release the system, pull the tab rearward and outward—toward the stock and away from the weapon—in an “L” shaped motion.

Stowage and release is now complete.